YIDUO PIPELINE VIBRATION RISK ANALYSIS SOFTWARE

New Products / New Technology

The software has the following functions:
Assess the vibration risk of pipeline systems during the design and operation phases;
Quantify and display with LOF (Likelihood of Failure) value;
Provide work suggestions and improvement measures for pipelines with high risk values;
Support screening for the following vibration mechanism risks:
1. Flow induced turbulence/vibration (FIT/FV) 2. Acoustic induced vibration (AIV) 3. Cavitation 4. Flow induced pulsation (FIP) 5. Thermowell 6. Water hammer (Surge) 7. Small diameter tube connection (SBC)

PULS COMPRESSOR PULSATION ANALYSIS SOFTWARE

New Products / New Technology

PULS is an ideal tool for predicting pressure pulsation levels and acoustic vibration forces. This program can be used to solve performance issues caused by reciprocating equipment or flow sources in pipelines and piping systems, as well as compressors, pumps, control valves, and metering stations. Unlike the old simulation calculation methods, PULS provides the most advanced digital solutions. This technology is based on a multi million dollar research project developed and validated by Nova Corporation (across Canada) and the University of Calgary (Alberta). PULS has an advanced Windows user-friendly click, toolbar, and menu driven interface for quickly developing system models while minimizing data input and ensuring fast model validation.

OPTOMET SCANNING LASER VIBROMETER

New Products / New Technology

1. Test the dynamic response and structural propagation noise of the structure. 2. No interaction with the system, no additional mass. 3. Obtain a large number of measurement point data in a short time. 4. No need for a large number of sensor cable connections, short installation and debugging time. 5. Can be used in difficult to access places. 6. Can test soft, precious metal embedded, fractured or high-temperature structures. 7. Can test small structures. 8. Can support high sampling frequency (up to 50MHz). 9. Supports long-distance testing (up to 300m). 10. Test results are independent of material properties. 11. High dynamic range, unit from m to fm